Durathane 64 Aliphatic Urethane
52% Solids, 2-component, Aliphatic/Polyester, Urethane Coating

Description

DURATHANE 64 Aliphatic Urethane is a solvent-based, two-component, aliphatic/polyester, 52% Solids Urethane Coating with excellent wear and adhesion properties. DURATHANE 64 Aliphatic Urethane is available in clear, and a variety of colors using POLYMERIC SOLUTIONS Colorants.

Recommended Uses

DURATHANE 64 Aliphatic Urethane is used on concrete floors that are subjected to moderate traffic. It is typically used on floor areas such as service bays, aircraft hangars, etc., where a high gloss finish is needed. When used as a final topcoat over decorative floor coatings and resurfacers, DURATHANE 64 Aliphatic Urethane will resist yellowing and scratching of the floor surface.

Features

• Available in Gloss or Satin Finish
• Extensive Range of Colors
• Excellent Abrasion Resistance
• Excellent Light Reflectance
• Excellent UV Resistance
• Resists Most Tire Marking After Full Cure
• VOC Compliant
• Can be Made Anti-Slip
• High Coverage Rate

Packaging

• 3/4 gallon Unit (2.8 L) packaged in a single carton
• 6 gallon Unit (22.7 L) packaged in proportioned 3 gallon (11.4 L) mixes
• 15 Gallon Unit (56.8 L) packaged in 5 gallon (18.9 L) pails
• 165 Gallon Bulk Unit (624.5 L) packaged in drums