Automotive Service and Showroom

High Performance Automotive Flooring Group

Duraprime 100

This 100% solids epoxy primer is typically used to promote adhesion and to seal old or new concrete. Specially formulated for use under our Top Coat products, this product is suitable for damp or dry substrates down to 5°C (40°F).

Durapoxy 1000

A 100% solids epoxy polymer base coat system for medium and general use applications. When used as a primer under the appropriate topcoats, this product provides very good impact, abrasion and chemical resistance characteristics. Typically used for interior, dry applications, when combined with a broadcast aggregate Durapoxy AB offers an easily maintained, slip resistant surface.

Durapoxy 1000 TC

This is a topcoat system with excellent adhesion capabilities, which makes single or multiple coat applications possible. Depending on project requirements, a topcoat can be applied, with or without slip-resistant texture.

Durathane CR64 & Durathane PA (fast cure)

These polyurethane topcoats, offer superior chemical & wear resistance, and will cure to a glass like finish, which produces excellent light reflective qualities.

Duraquartz

A unique topcoat system that combines color quartz granules in a clear, 100% solids matrix binder to produce a hard and extremely durable seam-less flooring system thats available in a wide range of colors.

Duraflake

An alternative decorative and seamless flooring system that combines colored flakes or chips and a clear protective top coat to form a durable, unique flooring product with endless, achievable color combinations.

Evaluation Factors

To achieve the longest-lasting protection, every factor of the environment must be evaluated and considered. These include; Abrasion, Impact, Chemical exposure, and type of fork lift or foot traffic. The Automotive Flooring Group features the most cost effective and versatile products that Polymeric Solutions has to offer. These products come available with a wide range of performance properties, which allow for applications undermost existing environmental conditions.

Polymeric Solutions systems provide an excellent seamless wearing surface that resists abrasion, impact and most common chemicals there by extending the service life of any unprotected substrate.

Any system from the Automotive Flooring Group can be installed as specific performance requirements dictate at any desired thickness, with an integral cove base, and in a variety of colors and slip resistant textures. Polymeric Solutions is low in maintenance and provide the ultimate in safe and clean work environments.

Performance & Life Expectancy

Obviously, appropriate care and maintenance of the polymer system must be encouraged and exercised at all times in order to derive the maximum service life that the polymer system is capable of providing. Selection of the polymer system must meet or exceed all factors and conditions as suggested in the paragraph above.

Compromising any of those factors, or choosing a polymer system based primarily on price considerations alone - could result in failure. However, the broadest range of protection can only be achieved through proper installation by an approved applicator.

Typical Product Uses

Ideal for Automotive Service & Showroom Applications